How to Unbrick your Xiaomi Redmi 2/2A phone using Mi Flash. (By Flashing Stock rom)
If your redmi device is
bricked, then follow this article to unbrick your device by flashing stock rom
using Mi flash.
If
Mi flash method didn’t work, then try this article.
Things you need –
·
A Windows running
Laptop/Dekstop
·
Your Xiaomi Redmi 2/2A
device
·
Mi Flash software – Download
·
Xiaomi drivers
·
MIUI 7 Global -- Download (Any Stock rom you want)
Follow the steps given below-
Step 1: Extract the MIUI 7.tar
file and then again extract it. You’ll see a folder named “wt88047_global_images_5.8.22_20150723.0000.6_4.4_global”.
Step 2: Download the Mi flash
software from the above link and install it. The software will install in “C:\Program Files (x86)\Xiaomi\MiPhone”. Open
the Mi flash software.
Step 3: Now, click on the arrow
button and then select “Advanced..” option.
Now, fill the “advanced” page as below-
To fill the page, you have to click on
“Browse” button which is on the right side of every blank box. Browse it to the
MIUI 7 folder (or any stock rom) where you extracted it.
- FastBoot Script : “flash_all.bat”
- NvBoot Script : leave it blank
- Flash Programmer : “MPRG8916.mbn”
- Boot Image : “8916_msimage.mbn”
- Raw XML File : “rawprogram0.xml”
- Patch XML File : “patch0.xml”
- After filling the page, hit “OK” button.
Now, click on the “Browse” button and select the “images” folder.
Step 4: Now, boot your device
into fastboot mode by pressing “Volume
Down + Power button” simultaneously.
Step 5: After entering in
fastboot mode, connect your device with your Dekstop/Laptop through usb cable.
Step 6: On your Mi flash
software click on the “refresh” button.
You can see your device id in the box.
Step 7: Now, click on “Flash” button to flash the rom. Enjoy.
If this article doesn’t works, then you can try
this oneà
No comments:
Post a Comment